sec

TENT STAKE PULLER

An excellent hand operated puller for most stake removal applications. Simply place the mouth around the stake and pull the stake out of the ground with a pumping action. A round, wide pivot base provides better leverage than other pullers and won’t sink into soft ground. Zinc Chromate plated to prevent rust. Now available in two styles: The Original & Extendable Handle! The extra length on the extendable version provides additional pulling leverage and then telescopes into the frame for easier storage & transport. The extendable handle is knurled for a non-slip grip. Three sizes of interchangeable mouths fit all stake sizes.

Heavy Duty Stake Puller with 63" handle
Extendable Handle Version expands to 74” and collapses to 50” in length
Extra small mouth for < 1”stakes
Small mouth for 1” stake
Large mouth shoe for 1 -1/8 " - 1 - 1/4 " stakes

STAKE PULLER "FORCE"

A one person gas powered unit drives a hydraulic pump exerting 2500 lbs psi, producing 10,000 lbs of pulling force

Remove Tent Stakes with Eaase!
Honda Power, 160cc Engine
Two-stage Hydraulic Pump
Detent Valve
16" Stroke
Hardened Pulling Yoke
14" Never-Flat Tires
One Person Operation

Click here for Brochure

FRAME TENT JACK

Eliminates the heavy strain on personnel, materials and equipment. Make installations quicker and safer.

Tent Jack 12' reach with tripod or wheels

Jack Replacement Parts:
Tripod Base assembly
Jack Mast - Maxi Tube
Jack Mast Head Assembly
Jack Winch,1500 lb. rated
Winch Mounting Bracket 2-pc for Maxi Tube
Winch Mounting Bracket Retro-fit for Twin Tube
Jack Strap Hook Assembly
Wheel Kit, Retrofit present jacks

Truper Sledge

It's a ten pound aluminum mallet that strikes like a 16lb. sledge hammer. Installation crews will experience less fatigue and you will benefit from increased productivity. A mallet with 183% more strike face translates to fewer misses. The rugged polymer handle, either regular or heavy duty, means less breakage.

Keder Feeder

A pair of keder feeders makes installation of slide-in tops faster and easier, saving labor costs and reducing fabric damage. By aligning the fabric keder with the tracks in your rafters, the chance of binding, snagging or even tearing tops when pulling them into the frame is much reduced. Fits all Maxi Slide Track rafters.

DOUBLE HEAD STAKES

Forged steel double heads to withstand hard driving in all ground conditions and allow easier pulling

Standard Steel

Size          Weight lbs.         Bundles of eight
5/8 " x 18"    2.3     Pallets of 150
1" x 30"        6.7
1" x 36"        8.0     Other Sizes Available
1" x 42"        9.4

TENT STAKE CAPS

Press on, heavy duty plastic stake caps protect and camouflage, blend with rigging, sidewalls and tent liners. 100 per Carton

PLUG-R®

Specially formulated asphalt plug permanently fills stake holes. Cold weather won't crack it, hot weather won't melt it. No extra filling necessary
Size    Stake Size    # in Carton
7/8 "             1"             80
1 1/8 "       1 1/4 "         44
3/4 ", 1 1/8 ", 1 1/4 ", 1 1/2 ", 1 3/4 " available in case lot.

LOAD DISTRIBUTION BAR

Fits industry proven stake spacing. Hitch rails integrated to accommodate tie-up points
3-hole 32" x 2" x 2"

RATCHET STRAPS

Versatile replacement for outside tent guys and other tent anchoring. Makes tightening and tension easy. If the tent is out of plumb simply back off and readjust. Quick connectors snap easily into all tent structure fittings. Anchor ends of aircraft tubular webbing loops around base plates, stakes, load plates and T-bars. Vinyl cover velcros around ratchet concealing hardware and strap excess for a finished look. White vinyl impregnated material is durable and easy to clean.
Large 2500 lbs rated
Small 750 lbs rated

QUICK PINS

The quickest, way to connect frame canopy tent systems, round pipe or tubing. Maxi Quick Pins are easily pressed into place, yet their correct tension holds them from backing out
Available in two sizes: 1 1 / 2 ",Gold for 1" pipe; 2" Silver for 2" tube

Pack 100
Carton 1,000
Pin Pouch Holds 50

BAIL PINS

The safest, way to connect frame canopy tent systems.

2" x 1 / 4 " Round Bail
2" x 3 / 8 " Square Bail

CARABINERS

Anodized aluminum carabiners with stainless steel springs and rivets are ideal for attaching rail ropes and straps to tent hardware. Rated at 6000 lbs.+ break strength. This aluminum alloy 7075 and heat treated carabiner is the strongest made in the U.S.

Stayput parts install in fabric without grommets. Simply punch a 1 / 4 " hole, insert the snap and press parts together. The tent wall hook snaps onto sidewall ropes or cables. The keder slide works in most aluminum beams. Made of high quality glass filled nylon impervious to UV or freezing, with no strings to corrode or jam.

ULTIMATE KEDER BULLET

The slick way to make keder tops slide through extrusions faster and easier. 11mm and 13mm applications

MAXI GRIP-IT

This simple yet versatile fabric clamp has many uses, commanding 175-200 lbs holding power. Hang tents, drop sheets, linings, join tarps or fabric without eyelets. Helps pull tent fabric through keder track.
Two models: Hand Grip and Equipment Mount

MAXIMIZER TENT WASH

Designed to clean vinyl tents and party equipment, this heavy duty detergent system is formulated to clean the most badly soiled surfaces. Excellent for spray on, wipe off hand washing and spotting for quick touch up of party products.

Tent Wash 101 i                            Spotter 86i
1 gallon             For difficult stains
Case of 4 gallons             Removes tar, wax, grease,
5 gallon pail             ball point ink from vinyl.
20 gallons ( 4- 5 gal pails)             1 gallon
55 gallon drum      Case of 4 gallons